Partie 1: Impression lithographique offset sur feuilles et à bobines. STANDARD. ISO. Third edition. Reference number. ISO (E). ISO is an international standard used to determine color and transparency conformance of four- color lithographic printing inks. determining if “High Tack Bengal Process Series” inks conformed to ISO ISO – was performed using an IGT Printability Tester. The four inks were.
|Published (Last):||14 March 2017|
|PDF File Size:||10.87 Mb|
|ePub File Size:||20.34 Mb|
|Price:||Free* [*Free Regsitration Required]|
If the colour distance between printed and blank black is put down as function of the ink film thickness, a line arises whose inclination is low at a high transparency of the printing ink and higher if the transparency is lower. In case a printing ink is not totally transparent, the light that touches the print sample during observation or colour measurement is increasingly scattered according to higher ink film thickness.
Europe For Europe, the average values 2846- more than 60 current process inks from different producers were generated.
ISO Conformance Tested Ink & Suppliers | Printing Industries of America
At complete transparency sometimes to be found with cyana horizontal line shows. In practice, however, this means that when launching colour management, the already used ink series in the print shop should serve as reference considering the commonly used full tone densities in the print shop.
The revision for offset printing is complete with the present standard ISO In complete accordance with the European colour scale, the international standard ISO was published in Print products should be produced and isi reproduced, again and again, all over the world, with the same results.
For the evaluation of the transparency, several printing samples with graduating ink film thicknesses are to be printed on black substrate. Input values and average ISO value for yellow.
Compliance with the standard is given if the measured values do not exceed the stipulated value of transparency. This also applies as the standard for sheet-fed offset. There are some colour systems on the market which work with up to seven colours in order to display the widest possible colour space.
Examination of transparency For the evaluation of the transparency, several printing samples with graduating ink film thicknesses are to be printed on black substrate. The usage of defined process printing inks with fixed properties in terms of colour is one of the most important preconditions to achieve reproducible print results. Measurement geometry Standard illuminant: Colour values It was very difficult to define the colorimetric nominal values which are to be the future chromaticity coordinates of the standardized printing isoo, as values had to be found that were acceptable to all experts from the various economic areas.
For multi-colour printing the inks are mixed by printing primary colours over or next to each other in solid and screen areas. According to our measurements, the most common ink series, especially ours, are at least very close to the nominal value and mostly within the given tolerances. Input values and average ISO value for magenta.
As process printing inks have to show sufficient transparency for the functioning of multi colour printing, corresponding values have been stipulated in ISO oso, which may not be undercut.
The colours is, magenta and yellow also io to this standard. The term for this new series was European colour scale or sometimes shortened to European scale. However as ido application is affected by many factors over which we have no control, we are not liable for printing failures.
In process inks were standardized for the first time in Germany with DIN 16 for letterpress and DIN 16 for offset printing.
Information on standard ISO For multi-colour printing the inks are mixed by printing primary colours over or next to each other in solid and screen areas. It is based on and conforms to our current knowledge.
Input values and average ISO value for cyan transparency. It was very difficult jso define the colorimetric nominal values which are to be the future chromaticity coordinates of the standardized printing inks, as values had to be found that were acceptable to all experts from the various economic areas.
Colour values for black were also included in the new standard.
ISO Epple Druckfarben AG
Transparency As process printing inks have to show sufficient transparency for the functioning of multi colour printing, corresponding values have been stipulated in ISOwhich may not be undercut. These series isk produced by us with utmost care and are delivered with the lowest colour metric fluctuations. The inclination is then 0. The colour values determined in the standard are a further approach to standardise offset printing.
In general, isp number of primary colours is optional; for economic reasons, however, not too many primary colours should be used. The reciprocal value of the inclination of the line of best fit by the measuring points, describes the extent of transparency. This colour definition was stipulated 2486-1 standard DIN 16 That means that the difference between printed and blank black increases.
ISO 2846 Conformance Tested Ink & Suppliers
In order to achieve better fastness properties, for example alkali or light fastness, a group of experts from the CEPE European Council of producers and importers of paints, printing inks and artists colours recommended the standardization of a new ink series, in For Europe, the average values of more than 60 current process inks from different producers were generated. The four-colour system has established itself in the main printing procedures, kso.
This technical instruction sheet is designed for your information and reference.